CFMoto 675NK from 2025 – ASPAR Racing Decal Kit
Suitable for the CFMoto 675NK from model year 2025 onwardsSuitable for the original OEM road bodywork. Fitment may vary with racing or aftermarket bodywork.
Product details at a glance
- Make and model: CFMoto 675NK
- Model years: from 2025
- Design: ASPAR Racing
- Decal kit manufacturer: 4moto
- Part number: CDS-44201-0
Digital print with UV-protective laminate · Gloss or matt finish · Installation: careful installation required
What is included
- 1 complete decal sheet as shown in the overview
- 1 application guide with tips for correct installation
- 1 positioning guide showing where each decal section goes on the vehicle
Materials and features
- High-quality digital printing with UV-protective laminate
- Precision contour cutting
- High-tack vinyl as specified for this product variant.
- Air-release technology for easy, bubble-free application
- Follow the application instructions for the vinyl supplied.
- Available with either a gloss or matt finish
- Decal sections included as shown in the overview.
- The product information states that removal with minimal residue is possible.
- Individual replacement decal sections can be reordered by email
The right vinyl for each component
To ensure reliable adhesion on challenging components, we select the vinyl to suit the motorcycle and the surface. Where required, we use high-tack vinyl on textured plastics, structured surfaces or powder-coated parts.
Your decal kit may therefore contain different types of vinyl, selected for the relevant areas of the motorcycle. Thorough cleaning and correct installation in accordance with our application instructions are essential for reliable adhesion.
Colour notice: The colours of the supplied vinyl may differ slightly from the product images due to differences in colour reproduction between monitors, tablets and smartphones.
Delivery time – made for you
Your decal kit is made for you after you place your order, in your chosen specification. We produce your order individually and prepare it for shipping as quickly as possible. Please refer to the delivery time shown for the item when planning your project. Thank you for your patience!
Learn more: select a section to open the detailed information.
Installation, tools and tips
What you need for installation
- Scissors and a craft knife
- Squeegee
- Hairdryer or heat gun
- Suitable cleaner and degreaser
- A clean, preferably dust-free workspace
- Some time, patience and a calm working environment
Difficulty level
Careful installation required
Installation requires patience and careful work. Experience with vehicle vinyl is helpful. For larger decal sections, we recommend help from a second person or a professional vehicle wrapper.
Installation tips for the best result
Prepare the motorcycle
- Thoroughly clean and degrease the bodywork sections to be covered.
- Completely remove polish, wax, silicone and other care products.
- Remove screws, accessories or bodywork parts if they obstruct installation.
- Use the positioning guide to identify each decal section and test its position before application.
Tip: Even small traces of grease, silicone or wax can reduce vinyl adhesion.
Workspace and temperature
- Work in a clean, dry and preferably dust-free environment.
- The recommended application temperature is between 18 and 25 °C.
- The motorcycle and decal vinyl should have reached room temperature before installation.
- Do not work in direct sunlight or on heavily heated bodywork.
Positioning and application
- Check the position of the decal section before removing its backing paper.
- Peel the backing paper away gradually rather than removing it all at once.
- Use even squeegee strokes from the centre outwards.
- Use the adhesive’s air channels to gently move trapped air towards the edges.
- Have a second person help with larger decal sections.
Tip: If a section is incorrectly positioned, gently lift the vinyl, realign it and squeegee it down again. Do not pull sharply on the vinyl.
Curves, edges and recesses
- Gently warm strongly curved areas with a hairdryer or heat gun.
- Distribute heat evenly and keep a sufficient distance from the vinyl.
- Stretch the vinyl only as much as necessary to shape it.
- Avoid overstretching, which may distort the design and reduce adhesion.
- After positioning, warm edges, channels and recesses again and press them down carefully.
After installation
- Check all edges and transitions for complete adhesion.
- Keep the motorcycle dry and preferably at room temperature for at least 24 hours after installation.
- Avoid riding, rain and washing the vehicle during this time.
- When cleaning later, do not direct a pressure washer at vinyl edges.
Development, fit and decal kits explained
What is a motorcycle decal kit?
A motorcycle decal kit is a set of self-adhesive vinyl sections designed to suit your motorcycle. Applied to the existing bodywork, the sections combine to create a coordinated design, such as a racing-inspired look.
The individual sections of this model-specific decal kit are designed to fit the CFMoto 675NK. The decal overview shows which areas are covered and which sections are included.
Development and fitment
This motorcycle decal kit was developed by 4moto for the CFMoto 675NK. Its cutting templates are carefully produced by hand.
The product images show the respective design. The accompanying overview shows which decal sections are included and where they are applied.
As our cutting templates are predominantly handmade, minor tolerances cannot be completely ruled out.
Digital printing and vinyl cutting explained
What is digital printing?
The printing process
Digital printing applies the design directly to self-adhesive vinyl using specialised printers. It is particularly suitable for multicoloured designs, gradients, shading, photographic images and complex logos.
Contour cutting
After printing, the decal sections are machine-cut along their outer contours. This allows complex shapes to be produced to suit the motorcycle bodywork.
Protective laminate
The printed vinyl is then sealed with a transparent UV-protective laminate. This protects the print from sunlight, moisture, dirt, fuel splashes and mechanical wear. The laminate also determines the finish: depending on your selection, the decals are supplied with a gloss or matt surface.
What is a vinyl-cut decal?
Cut from vinyl rather than printed
For a vinyl-cut decal, the design is not printed onto vinyl. A cutting plotter cuts lettering, logos or shapes directly from coloured adhesive vinyl, which is usually a single colour.
Weeding and transferring
After cutting, unwanted vinyl is removed by hand, a process known as weeding. Transfer film is then applied to the design. It holds individual letters and design elements in their intended positions. After application, the transfer film is peeled away, leaving only the vinyl design on the surface.
Applications
Vinyl-cut decals are particularly suitable for single-colour lettering, race numbers, logos and simple graphic designs. Depending on the vinyl used, they can be applied dry or wet.
Frequently asked questions
CFMoto 675NK decal kit: frequently asked questions
Which motorcycle does this decal kit fit?
This ASPAR Racing decal kit is designed for the CFMoto 675NK from model year 2025 onwards with original OEM road bodywork. Fitment may vary with racing or aftermarket bodywork.
Can I choose a gloss or matt finish?
Yes. Select the available gloss or matt finish before ordering. The design follows the product images; colour reproduction may vary between screens.
Can I install the kit myself?
Installation requires patience and careful work. Experience with vehicle vinyl is helpful. For larger decal sections, we recommend help from a second person or a professional vehicle wrapper. Use the supplied application and positioning guides.
Can I reorder individual decal sections?
Yes, individual decal sections can be reordered by email. Have part number CDS-44201-0 and the name or a photo of the required section ready.
The ASPAR Racing motorcycle decal kit by 4moto is designed for the CFMoto 675NK from model year 2025 onwards with original bodywork. The graphics combine digital printing with UV-protective laminate and are available in gloss or matt. Explore more motorcycle decal kits by 4moto.
_ASPAR_Anleitung.jpg)
go to post